ProductName:ConcreteSpunElectricPoleSteelMouldSize:length7-15mMaterial:steel Features: 1.Weldingtechnology,whichenhancesthesmoothfinishofthemouldwall,andeliminatestheuneventracesofrivetholes.Sotheconcretepolesappearancewillbeimprovedsignificantly.2.ThecylinderischangedtoU-typelongitudinalstiffenerswhichcangreatlyincreasethestiffnessandflexuralstrengthofthesteelmould,3.Installtheslotwithrubbersealingstrip,inordertopreventleakagetoensurequality.ProductsDescription: Pre-stressedconcretepolemouldisusedforelectronicconcretepolemaking.Itsmainlymanufacturetechnologyislongitudinaltensionbysteelwires.Thenitcansqueezeouttheexcesswaterintheconcreteunderthecentrifugalforce.Thus,itcangreatlyimprovetheconcretedensityandstrength. Inordertoformconcretemorequicklytomeetthedesignstrengthofmorethan70%,steamcuringcanbecarriedoutsoastoshortenthemould-releasingcycle.Concretespunpolemouldisthemostimportantconcretepoleformingequipmentinconcretepolefactory.It’sdesignedandmanufacturedaccordingtoconcretepolespecifications.Itslengthrangesfrom6mto18m,diameterfrom110mmto350mm.wecanalsocustomizeotherspecificationofconcretepolemouldaccordingtorequestofcustomers.Concretepolemouldrotatesoncentrifugalspinningmachinewithspeedfrom1100rpmto2000rpm.concretespunpolemouldismadeof10mmsteelplateandrunningwheelsaremadeof45#castingsteel.

产品编号

Category:

Concrete Pole Mould

数量

库存:



Description

[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[产品参数, 参数]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]

Information

Video

Prestressed circle spun concrete pole moulds is used for concrete pole making. Its mainly manufacture

technology is longitudinal tension by steel wires. Then it can squeeze out the excess water in the

concrete under the centrifugal force. Thus, it can greatly improve the concrete density and strength.

In order to form concrete more quickly to meet the design strength of more than 70%, steam curing

can be carried out so as to shorten the mould-releasing cycle concrete pole mold (15)

pole mould.jpg

paste-pic-dp_uuid_wncy9

1. Saving a great deal of steel, about 30~70% (employing cold drawn steel wire can save 30%~60%; employing high stress steel wire can save 40%~69%).

2. Crack resistance can increase about 3~5 times.

3. Rigidity increases 1~3 times.

4. Reducing the cost (using cold drawn steel wire can reduce 25%~40%; using high stress steel wire can reduce 12%~21%).

5. Good durability, can delay the existence and expansion of cracks.

6, Protect the environment on which human beings depend on for existence, and reduce the deforestation.

Taizhou amity care international co.,ltd is regarded as the foreign trade department of Taizhou xurui

machinery manufacturing co;, all abroad (overseas) tasks and international businesswill be

undertaken by "amity care ".

We are manufacturers of centrifugal spinning machine ,mould ,heading machine ,cutting

machine,cage welding machine , tension jack for pre-stress .feeding machine for different

capacity ,weave welding machine ,sheet cutting machine etc. we also can supply setting up

a new factory full line service . We have already exported various kinds of concrete pile ,

pole and pipe concern making machines to overseas countries and regions such as indonesia

,parkistan,Vietnam ,myanmar ,korea,malaysia ,south african etc .Mideast, Southeastern Asia.

扫二维码用手机看

Product Name:Concrete Spun Electric Pole Steel Mould

Size: length 7-15m

Material: steel

Features:

1. Welding technology, which enhances the smooth finish of the mould wall, and eliminates the uneven traces of rivet holes. So the concrete poles appearance will be improved significantly.

2. The cylinder is changed to U-type longitudinal stiffeners which can greatly increase the stiffness and flexural strength of the steel mould,

3. Install the slot with rubber sealing strip, in order to prevent leakage to ensure quality.

Products Description:

Pre-stressed concrete pole mould is used for electronic concrete pole making. Its mainly manufacture technology is longitudinal tension by steel wires. Then it can squeeze out the excess water in the concrete under the centrifugal force. Thus, it can greatly improve the concrete density and strength.

In order to form concrete more quickly to meet the design strength of more than 70%, steam curing can be carried out so as to shorten the mould-releasing cycle.

Concrete spun pole mould is the most important concrete pole forming equipment in concrete pole factory.It’s designed and manufactured according to concrete pole specifications.Its length ranges from 6m to 18m,diameter from 110mm to 350mm.we can also customize other specification of concrete pole mould according to request of customers.Concrete pole mould rotates on centrifugal spinning machine with speed from 1100rpm to 2000rpm.concrete spun pole mould is made of 10mm steel plate and running wheels are made of 45# casting steel.

Inside Diameter(mm)	Wheel Distance(mm)	Wheel Diameter (mm)	Length(m)
Ø100	2000	600	6-7
110	2000	600	6-7
120	2000	600	6-8
130	2000	600	6-8
150	2000	600	6-10
170	2000	600	6-12
190	2000	600	7-12
190	2000	650	15-18
230	2000	650	6-9
310	2000	650	6-9
350	2000	680	6-9
390	2000	750	6-9